Saturday, February 07, 2009

Window Challenges

Last year Camano Island homeowners presented me with a real challenge. One wall of the great room of their home perched high on a hill is composed of a series of three arched, stacked picture windows looking out on a gorgeous vista of islands dotting the peaceful waters below. The room faces south and on a sunny day light fills the space. The existing shadings were simply inadequate; the homeowners desired a fabric treatment that would soften and beautify the room as well as add another layer to help control the amount of light coming in.

I was to treat the 6 bottom rectangular windows; 3 side by side, stacked in 2 rows. A 4 foot window next to a 6 foot window next to a 4 foot window, separated by narrow 8 inch strips of wall, with only 8 inches of wall at each end. Not much room to stack any draperies!

The homeowners initially desired a hand-traversing custom iron rod, color matched to existing ironwork in the home. After discussions with the hardware supplier, installer, homeowners and myself, a much better solution for these 15 foot high windows was found - The Kirsch Estate Rod, with 3 separate cord traverse rods, one opening left, one right, and one center opening. The wood fascia was one continuous 17 foot long rod, custom stained to match the ironwork.

We needed to be very careful with the fabric that was chosen. Because there was so little room to stack drapes on either side of the windows we chose a semi-sheer unlined Ado fabric which was beautiful both on the face side and the reverse. The homeowners wanted a striped fabric which was not available so we created a wide stripe using two colors of the same fabric and minimal seaming. This took some math skills working out stripe sizes so that the stripes looked even although the drapes panels were not the same sizes! Kudo's to my skilled workroom seamstress - that was a lot of seaming! Ado's Eurohem was a clean and contemporary look to finish the bottom.

Each 4' window had its own panel that stacked onto the wall; the center window had one drape pair that mainly stacked onto the very small 8" wall separating the windows. This was a very good solution to allowing as much of the windows to remain open to the view as possible while making it easy for the homeowners to operate.

Once again, digital photography and the DreamDraper software was invaluable. I took photos of the room and designed unlined pinchpleated Ado draperies for the windows. The color renderings helped the homeowners visualize how the final project would appear. And my installer Tom was the other key component to making this project come together, can I say it, seamlessly!

The homeowners were wonderful to work with. I went on to complete draperies for two other rooms of their home, blackout drapes and cornices for their master bedroom and media room. They remained patient in the face of what seems to be almost inevitable delays nowadays for fabrics, hardware and trim.

And the end product - gorgeous window coverings to enhance a spectacular home with a magnificent view!

No comments: